Select a thumbnail to change viewBenchtop Ultraviolet Light Accelerated Weathering Tester
This NT 882-2 is optimized and upgraded from our NT 882, featuring higher intelligence. Users can complete settings easily via touchscreen operation. It simulates temperature, rainfall and UV exposure to predict the relative durability of paints and coatings. It is used to observe physical degradation of durable materials including fading, chalking and cracking. Equipped with a rotating sample holder inside, it ensures uniform UV irradiation on samples and improves test result consistency. It comes with an integrated water tank and water pump, adopting top spray design to simulate outdoor rain. A heating tube inside the water tank heats water to simulate outdoor temperature. The whole chamber is constructed from stainless steel for corrosion resistance and longer service life.
Introduction
This NT 882 is designed for accelerated aging tests under light and water exposure, to predict the relative durability of non-metallic materials including paints, coatings and plastics. It is especially suitable for observing the degradation of physical properties of high-durability materials, such as gloss loss, haze, strength reduction, chalking, cracking, blistering, embrittlement and fading.
Like other laboratory accelerated weathering tests, the test results from this instrument cannot replace natural outdoor exposure to judge the real service life of materials. Nevertheless, its comparative test conditions enable rapid evaluation of material aging resistance. It is highly practical for screening or optimizing new and existing formulas, as well as routine product quality monitoring.
UV radiation is the primary light factor leading to performance degradation of outdoor products. Fluorescent UV tubes feature stable spectral energy distribution and low cost. Therefore, UV aging test chambers have become the most widely used weathering testers globally, thanks to their fast testing speed, easy operation and cost-effectiveness. As an economical model, this unit is an ideal choice for laboratories focusing on cost performance.
It adopts a rotating sample holder design, which effectively offsets uneven UV radiation caused by lamp aging and batch variations. This eliminates the tedious work of regularly rearranging sample positions required on conventional testers.
Moisture is another critical destructive factor in accelerated aging. This tester uses water spray to simulate moisture attack. Adjustable spray timing helps replicate real-world environmental effects, such as temperature cycling and rain-induced mechanical erosion. Its temperature control system also allows tuning the photochemical reaction rate within a proper range.
To satisfy the durability requirements for weathering test equipment, its main structural parts are manufactured from corrosion-resistant stainless steel. The design features a simple structure for easy operation and maintenance. With low running costs, it quickly reproduces long-term natural weathering damage and identifies quality gaps between test samples and reference control panels.
Q: Does NT 882/2 support rain simulation?
A: Yes, it adopts built-in water tank and top spray structure to simulate outdoor rainfall.
| Item | Parameter |
| Total power | 1.25 kW |
| Power supply | 220V / 50Hz |
| Test time timing range | 0 h ~ 999 h |
| Spray time timing range (dual setting) | 1 s ~ 99 min 59 s / 1 min ~ 9999 min |
| Test temperature setting range | RT ~ 60 ℃ |
| UV peak nominal wavelength (quantum energy) | 313 nm (91.5 kcal/mmol) |
| UV fluorescent tube power | 0.02 kW × 3 |
| Rated lamp service life | 1000 h |
| Distribution radius from lamp tube to rotation axis | 80 mm |
| Minimum distance from lamp surface to sample | 28 – 61 mm |
| Rotation diameter of sample holder | Ø 189 ~ Ø 249 mm |
| Transmission motor power of sample transfer frame | 0.025 kW |
| Transmission motor speed | 1250 rpm |
| Sample rotation speed | 3.7 rpm |
| Water pump power | 0.08 kW |
| Water pump flow rate | 47 L/min |
| Electric heating tube power | 1.0 kW |
| Sample size | 150 × 70 mm |
| Chamber dimension (L × W × H) | 890 × 430 × 570 mm |
| Shipping weight | 60 kg |
Video resources are being prepared. Contact our team for operation support.
Documents are being prepared. Request the latest version from our team.



