Availability: | |
---|---|
Quantity: | |
PIG Multi-purpose dry film measuring instrument
Description:
Measuring film thickness in the range of 2-2000µm on every substrate (steel, non-ferrous metal, plastics, wood, concrete. plaster. etc.).When it is necessary to measure the individual layer thickness in a multiple-layer coating system, the most accurate method available is the Paint Inspection Gauge(P.I.G)coating thickness gauge.
Adhesion test by means of cross-cut test in accordance with ASTM D 3359&DIN 53151.Indentation hardness test in accordance with DIN EN ISO2815(Buchholz),Observing pinhole, pitfall, fissure, bubble, squama, and quality control of adhesion and keelson pre-processing through microscope.
Potable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. Ideal for customer service technicians and demonstrations.
Built-in microscope with illumination
Three cutters supplied(No.1,2 and 3)
Adhesion-cross hatch cutter technique
Hardness Tester-Buchholz Hardness Test
Three in one gauge,simply turn the wheel to change the function
Technical Parameters
■ Size:110×80×75mm
■ Microscope:50×magnification with illumination
■ Weight:380g
■ Battery:1.5Volts “AA”Alkaline Battery
Thickness Cutters | No.1 Coating thickness between 20-2000μm(0.8-70mils) | ||
No.2 Coating thickness between 10-1000μm(0.4-40mils) | |||
No.3 Coating thickness between 2-200μm(0.08-8mils) | |||
Special Cutters are also available | Special Cutter A:Coating thickness between 0-100μm(0-4mils) | ||
Special Cutter B:Coating thickness between 0-3000μm(0-120mils) | |||
Buchholz Hardness Test | Indentation Tool | Optional Accessory | Slip-on Weight |
Microscope | X50 magnification |
Ordering Information: NT 448 Paint Inspection Guages (PIG)
PIG Multi-purpose dry film measuring instrument
Description:
Measuring film thickness in the range of 2-2000µm on every substrate (steel, non-ferrous metal, plastics, wood, concrete. plaster. etc.).When it is necessary to measure the individual layer thickness in a multiple-layer coating system, the most accurate method available is the Paint Inspection Gauge(P.I.G)coating thickness gauge.
Adhesion test by means of cross-cut test in accordance with ASTM D 3359&DIN 53151.Indentation hardness test in accordance with DIN EN ISO2815(Buchholz),Observing pinhole, pitfall, fissure, bubble, squama, and quality control of adhesion and keelson pre-processing through microscope.
Potable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. Ideal for customer service technicians and demonstrations.
Built-in microscope with illumination
Three cutters supplied(No.1,2 and 3)
Adhesion-cross hatch cutter technique
Hardness Tester-Buchholz Hardness Test
Three in one gauge,simply turn the wheel to change the function
Technical Parameters
■ Size:110×80×75mm
■ Microscope:50×magnification with illumination
■ Weight:380g
■ Battery:1.5Volts “AA”Alkaline Battery
Thickness Cutters | No.1 Coating thickness between 20-2000μm(0.8-70mils) | ||
No.2 Coating thickness between 10-1000μm(0.4-40mils) | |||
No.3 Coating thickness between 2-200μm(0.08-8mils) | |||
Special Cutters are also available | Special Cutter A:Coating thickness between 0-100μm(0-4mils) | ||
Special Cutter B:Coating thickness between 0-3000μm(0-120mils) | |||
Buchholz Hardness Test | Indentation Tool | Optional Accessory | Slip-on Weight |
Microscope | X50 magnification |
Ordering Information: NT 448 Paint Inspection Guages (PIG)